Figure 8-110 Executing Window; Figure 8-111 Processing Completed Message - Hitachi S10VE User Manual

8. Tools
- To save an autosave file, perform the following procedure:
[1] In the file save window, specify a name for the autosave file (XXXX.atdmp).
[2] Click Save. The file save window closes and the Executing window appears (Figure 8-110).
[3] To close the file save window, click Cancel.
- PCs No
The system displays the PCs number assigned to the PCs for which the AutoSave file is being saved.
- If the system successfully creates the autosave file and fault analysis information file, it displays a
message indicating that processing has completed (Figure 8-111).
The autosave file and fault analysis information file are given the following names:
Autosave file: XXXX.atdmp
Fault analysis information file (CP side): XXXX_cp.txt
Fault analysis information file (HP side): XXXX_hp.txt
(5) Click Close to close the AutoSave window.

Figure 8-110 Executing window

Figure 8-111 Processing completed message

XXXX is the file name you specify in the file save window.
8-98