Table 3-2 Mount Base Specifications; Table 3-3 Power Supply Module Specifications - Hitachi S10VE User Manual

3. Specifications
Item
Model
Slot PS slot
IF slot
CPU slot
I/O slot
FG terminal
Hot swapping
Item
Model
Rated input voltage
Input voltage range
Input voltage waveform
distortion
Input current
Allowable momentary
power interruption time
Power consumption
Rush current
Rated output current
Dielectric strength
withstand voltage
Hot swapping
#1: Eliminate inrush current of less than 100 microseconds at power-on. Use a circuit breaker that does not shut off in less than
100 microseconds.

Table 3-2 Mount base specifications

Specification
HSC-1770
Power supply module installation slot
RI/O-IF module installation slot
CPU module installation slot
Option module or PI/O module installation slot
(maximum of 7)
Yes
Not supported

Table 3-3 Power supply module specifications

Specifications
LQV410
100 to 120 V AC
100 to 110 V DC
85 to 132 V AC
85 to 143 V DC
AC input
DC input
AC100～120V
DC100～110V
AC85～132V
DC85～143V
AC100～120V
DC100～110V
#1
13 A or less (85 to 132 V AC/85 to 143 V DC)
10 A (5V)
1500 V AC/1 minute
Not supported
10% or less
5% or less
1.2A maximum
1.2A maximum
10ms or less
10ms or less
144VA
132W
3-2
Remarks
For details about the modules that can
be installed and the restrictions that
apply, see Chapter 6. Installation.
Remarks
Single phase 50/60 ±5 Hz
Between all input terminals and all
output terminals or
between all input terminals and FG/
protective grounding terminals.