Cpms Debugger Menu: Initialize Task; Figure 8-118 Initialize Task Window; Figure 8-119 Error Message When Cpms Is Not Downloaded - Hitachi S10VE User Manual

8. Tools

8.4.7.3 CPMS Debugger menu: Initialize Task

Use this menu item to initialize the task environment.
Confirm the following before initializing the task environment:
[1] The PADT is not connected to an ET.NET module.
[2] CPMS has been downloaded.
[3]The hardware CPU RUN/STOP switch is set to RUN.
(1) From the main menu, select CPMS Debugger and then Initialize Task.
If the communication type is ET.NET, an error message indicating that the function cannot be used
with ET.NET is displayed (Figure 8-50) when you click Execute.
(2) The Initialize Task window appears.
(3) To initialize the task environment, click Execute.
- If CPMS has not been downloaded, the system displays an error message to that effect (Figure 8-119).

Figure 8-119 Error message when CPMS is not downloaded

- If the hardware CPU RUN/STOP switch is set to STOP, the system displays an error message
indicating that execution is impossible for that reason (Figure 8-52).

Figure 8-118 Initialize Task window

8-114