Table of Contents
Advertisement
8. Tools
8.4.2.1 Project menu: New
Use this menu item to create a project file containing the information required to set up PCs.
To create a project that uses C mode, one way is to log on as an administrator with RPDP installed and start
BASE SYSTEM normally. Another way is to log on as a user who belongs to the RPDPusers group and
use temporary administrator privileges to start BASE SYSTEM.
● You cannot log on using multiple user accounts and switch between them without logging off. You
must log off before you can switch to another user account.
(1) From the main menu, select Project and then New.
(2) The Properties window appears.
If a Properties window is already open, the new window will appear when you close the existing one.
If you have not saved the settings in the open Properties window, a message appears asking if you
want to save the settings.
Click Yes to save the settings and close the project.
Click No to close the project without saving it.
Notice
Figure 8-17 Properties window
Figure 8-18 Save confirmation message
8-22
Advertisement
Table of Contents
Troubleshooting
