Hitachi S10VE User Manual page 210

The information the error code represents is output in the following format:
Panic log:
[*] ******** (PC=********, FADR=********)
(1) (2)
(1) Error severity type
[F]: Fatal error
[FU]: Built-in subroutine error
(2) Error message
(3) Program counter
(4) Fault address
Non-panic logs:
First pattern:
[*] ******** (UNO=**, DEV=********) (TN=***) (SLOT=**)
(1) (2)
(1) Error severity type
[F]: Fatal error
[E]: Error
(2) Error message
(3) Unit number, device number
Range of unit numbers: 1 to 24
Range of device numbers: 0x00000000 to 0xFFFFFFFF
(4) Task number
Range of task numbers: 1 to 300
(5) Slot number
Range of slot numbers: 0 to 7
Note: In the first pattern for non-panic logs, the information in (3) to (5) is not output for some error
types.
(3) (4)
(3)
[W]: Warning
[I]: Information
8-81
(4) (5)
8. Tools