Hitachi S10VE User Manual page 29

11. Operation
This chapter explains the operation of the S10VE system.
12. Inspection
This chapter explains the replacement cycle of limited-life components used in the S10VE system, and the process of
regular inspections.
13. Troubleshooting
This chapter explains how to analyze the cause of errors that occur in the S10VE system, and the remedial action that
needs to be taken.
14. Adding and Replacing Modules
This chapter explains how to replace and add modules in the S10VE system.
Trademarks
• Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
• Ethernet is a registered trademark of Fuji Xerox Co., Ltd.
Other company and product names mentioned in this document may be the trademarks or registered trademarks of their
respective owners.
This manual sometimes omits the ® or ™ symbol.
Note about storage capacity calculations
Memory capacities and requirements, file sizes and storage requirements must be calculated according to the formula
n
2 . The following examples show the results of such calculations by 2
1 KB (kilobyte) = 1,024 bytes
1 MB (megabyte) = 1,048,576 bytes
1 GB (gigabyte) = 1,073,741,824 bytes
1 TB (terabyte) = 1,099,511,627,776 bytes
As for disk capacities, they must be calculated using the formula 10
above example capacities using 10
1 KB (kilobyte) = 1,000 bytes
1 MB (megabyte) = 1,000
1 GB (gigabyte) = 1,000
1 TB (terabyte) = 1,000
n
in place of 2
2
bytes
3
bytes
4
bytes
n
(to the right of the equal signs).
n
. Listed below are the results of calculating the
n
.
ii