Project Menu: End; Figure 8-56 Reset Confirmation Message (End); Figure 8-57 Error Message When User Does Not Have Operation Log Write Permission - Hitachi S10VE User Manual

8. Tools

8.4.2.7 Project menu: End

Use this menu item to exit the application and output an operation log.
(1) From the main menu, select Project and then End.
(2) The confirmation message shown in Figure 8-56 might appear. If it appears, you might have clicked
Cancel when asked by BASE SYSTEM to confirm a reset that was required to apply settings to PCs.
Alternatively, you might have clicked OK but the reset failed.
Click OK to reset the PCs.
If you click Cancel, the PCs are not reset.
If the reset is successful, the system displays a message to that effect (Figure 8-33).
If the reset fails, the system displays a message reporting that the reset was not successful (Figure 8-
34).
(3) The system outputs an operation log.
For details about the contents of the operation log file, see 8.6.1 Operation history recording function.
The following error message appears if the logged-on user does not have permission to write to the
file:

Figure 8-57 Error message when user does not have operation log write permission

(4) Exit BASE SYSTEM.

Figure 8-56 Reset confirmation message (end)

8-50