Net Module Troubleshooting; Figure 13-18 Troubleshooting Procedure - Hitachi S10VE User Manual

13. Troubleshooting
13.2.2.5 ET.NET module troubleshooting
For information about troubleshooting cases where data is not output to communications devices from the
ET.NET module, or where data is not input into the ET.NET module from communications devices, see
Figure 13-18. If the CPU module indicator displays an error code, take corrective action according to Table
13-8.
Use the ET.NET module LED status and BASE
SYSTEM/S10VE check whether a major failure has
occurred, whether there are any settings errors,
whether any cables are disconnected, and similar
problems. (See 13.2.2.5 (2) Checking for errors by
using BASE SYSTEM/S10VE.)
A failure occurs.
Were you able
to recover from
the failure?
Yes
Troubleshooting is complete.

Figure 13-18 Troubleshooting procedure

13-50
No
Contact your salesperson at
the dealer or at Hitachi, Ltd.