Wiring Standards; Terminal Block And Solderless Terminals; Figure 7-1 18-Point Terminal Block; Figure 7-2 11-Point Terminal Block - Hitachi S10VE User Manual

7.2 Wiring standards

This section explains the wiring standards for the S10VE.

7.2.1 Terminal block and solderless terminals

Figure 7-1 to Figure 7-5 show the terminal block and solderless terminals used with the S10VE.
■ 18-point terminal block
Solderless terminal type: M3
Applicable module name: RI/O-IF
Applicable module model: LQE950
Tightening torque: 0.6 N-m
■ 11-point terminal block
Solderless terminal type: M3
Applicable module name: J.NET (JPCN-1 line)
Applicable module model: LQE540-E
Tightening torque: 0.6 N-m
87.5
8.5 1.3 7.2

Figure 7-1 18-point terminal block

87.0
7.62 1.22 6.4
11-M3

Figure 7-2 11-point terminal block

7-3
18-M3
2-M3
Unit: mm
Unit: mm
7. Wiring