Resetting Alarm And Fault Messages; Parameter Settings - ABB ACS6080 User Manual

• Motor current in %
• Actual armature voltage in V
• Actual converter current in A (rectified AC current value)
When the control panel has been set to remote, the START / STOP keys
become inoperable.
8.6.2

Resetting alarm and fault messages

• Alarm messages: cannot be reset by pressing the reset soft key.
The alarm resets automatically as soon as the reason causing the
alarm has been resolved.
• Fault messages: must be reset manually after the reason causing the
fault has been resolved.
The message on the display can be reset either by pressing the reset
soft key on the EXU control panel, or by pressing the reset button
on the control panel of the drive.
8.6.3

Parameter settings

▲
NOTICE
Risk of component damage!
Running the drive system with incorrect data can result in improper
operation, reduction of control accuracy and damage of equipment!
• DO NOT change any parameter if the meaning of the parameter and
the effects of the change are not fully understood.
The parameters are set as required for operation and verified during
commissioning and must not be changed afterwards.
3BHS842007 E01 REV C ACS6080 USER MANUAL
08 OPERATION
169/238