Configuring The Climatix Touch Panel; Set Screen Brightness; Set The Time And Date - Siemens Climatix POL8T2.70/STD Basic Documentation

Configuring the Climatix touch panel

6

Set screen brightness

6 Configuring the Climatix touch panel
Note:
6.1 Set screen brightness

6.2 Set the time and date

22 | 31
You can configure the following Climatix touch panel settings:
● Screen brightness
● System date and time
● Network configuration
● Serial port test
● Language
To access the Settings mode:
1. Shut down the Climatix touch panel.
2. Manually set the DIP switches to the position 010.
3. Switch on the Climatix touch panel.
All settings are stored even if the Climatix touch panel is powered off.
Press Brightness, and adjust the screen brightness.
Press Date / time and use + or - to set the date and time, and press Ok.
A6V11521026_en--_b