Power Supply - Siemens SIMATIC HMI Operating Instructions Manual

Safety instructions, standards and notes

2.4 Power supply

● EN 300 328 V1.6.1, EN 300 440-1 V1.3.1, EN 301 893, EN 301 489-1, EN 301 489-17,
● EN 50 360, IEEE 1528-X, EN 50371, EN 50 392
If the HMI device is used in a system, the following standards are fulfilled:
● prEN 1921, Industrial automation systems – safety of integrated manufacturing systems
● EN 12417:2001, Machine tools – safety – machining centers
● UL 508, Industrial Control Equipment
● CSA C22.2 No.14, Industrial Control Equipment
2.4 Power supply
Safety specifications
CAUTION
Damage to the HMI device
Only operate the HMI device with approved components:
• Batteries
• Charging station
• Tabletop power supply unit
http://mall.automation.siemens.com
Injury or material damage
The HMI device should only be operated in the plant with the battery or in the charging
station. Operation with the tabletop power supply is not permitted in the plant.
Effectiveness of the emergency stop button
The emergency stop button only becomes active when the HMI device is integrated into the
safety program.
40
FCC Part 15.245, 15.247, 15.407
Wireless approval
Radiation protection requirements (SAR/EMF)
WARNING
WARNING
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01