Basic Hmi Software Functions - Bosch Rexroth IndraMotion MTX micro Easy Setup Manual

DOK-MTXMIC-EASY*******-CO06-EN-P
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
10.2.3

Basic HMI software functions

Editing parameters
Text editor
Often, it is necessary to change parameters which are presented in the form
of a table.
Fig. 10-6: Example table (NC variables list)
The values are always edited as follows:
1. Place the focus on the value to be edited using the cursor keys (▲, ►, ▼,
◄)
2. Switch to edit mode by pressing the <Enter> key
3. Enter or change the value
4. Apply the value with <Enter>. Edit mode is exited automatically
If tables extend beyond the screen page shown, use the <Page
▲> and <Page ▼> keys to move to the desired page of the table.
The text editor is used to create, edit and save ASCII text files and, above all,
NC programs.
Fig. 10-7: Text editor
Bosch Rexroth AG
Operating the IndraMotion MTX micro
137/177