Bosch Rexroth IndraMotion MTX micro Easy Setup Manual page 144

142/177 Bosch Rexroth AG
Operating the IndraMotion MTX micro
Diagnostics
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Fig. 10-13: Tool editor – turning example
The tool editor also allows creating a new tool. To do this, select an empty
tool memory using the cursor keys and open the editor by pressing <F3>. At
least one tool number (T Number) must be assigned.
Fig. 10-14: Diagnostic messages
The diagnostic screen displays a list of current diagnostic messages. It also
shows the number, time of appearance and the message text for each mes‐
sage. The lower area shows the cause and the recovery text for each mes‐
sage that has been selected with the cursor keys.
DOK-MTXMIC-EASY*******-CO06-EN-P