Bosch Rexroth IndraMotion MTX micro Easy Setup Manual page 128

126/177 Bosch Rexroth AG
Commissioning the drives
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Fig. 9-30: Execute the calculation and display result
Ensure that the drive is enabled.
Fig. 9-31: Warning "Hazardous movements"
By enabling the Easy startup mode, the control is transferred to the drive.
Switch the drive to parameterization mode.
The axis enable might have to be disabled.
In the NC, select the operating mode "Manual".
The axis can be enabled for movement via the button <Drive enable>.
DOK-MTXMIC-EASY*******-CO06-EN-P