Bosch Rexroth IndraMotion MTX micro Easy Setup Manual page 136

134/177 Bosch Rexroth AG
Operating the IndraMotion MTX micro
Machine control panel (4)
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Operating area Tasks
Operation in Manual, MDI, Automatic modes
Machine Input of zero point offsets
Input of variable values
Input of tool corrections
Tools
Tool management
Creating, editing and managing NC programs
Program
Copying the programs from and to the USB flash drive
Displaying the cycle time and the parts counter
User login / logout
Maintain
Backup of parameters and programs
System information (e.g., software version)
Selecting the active CNC channel
Setting CNC and drive parameters
System
Setting the user management
Setting the communication parameters
Displaying current diagnostic messages
Displaying the log of the diagnostic messages
Diagnostics
Displaying the state of the CNC-PLC interface
Displaying the state of the digital PLC inputs and outputs
Tab. 10-1: Operating areas
The machine control panel provides the E-stop pushbutton, the override
switches, the PLC control keys, and the USB interface. The control panel for
the turning machine additionally incorporates a handwheel and an axis selec‐
tor switch. Most of the functions of the PLC keys are already assigned. The
keys labeled K1..K10 (K1..K6 for turning machines) can be used as desired.
The most important elements for operating the machine are described in the
following.
DOK-MTXMIC-EASY*******-CO06-EN-P