Bosch Rexroth IndraMotion MTX micro Easy Setup Manual page 142

140/177 Bosch Rexroth AG
Operating the IndraMotion MTX micro
Manual data input mode (MDI)
Automatic operation mode
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Fig. 10-10: MDI screen
Press the <MDI> key to activate the screen. MDI blocks can be entered in the
editor field to the left and processed separately (<F3>) or continuously
(<F4>).
Fig. 10-11: Automation screen
Press the <Auto> key to switch to automatic mode and activate the screen.
Press <F2> to start the NC program selection. After having selected the de‐
sired program with the cursor keys (▲, ▼) and <TAB> if necessary, press
DOK-MTXMIC-EASY*******-CO06-EN-P