Table of Contents
Advertisement
PXI-CORE Edge controller
5.3
Diagnostics
The diagnostics section allows you to get detailed information from the apps running on the
PXI-CORE edge controller to analyze possible issues.
Notice!
i
By default the logbook starts empty after a power cycle. You can enable persistency to
analyze difficult issues but be aware this causes more wear on the internal flash.
If the persistency is no longer needed, disable it immediately.
5.4
About
The About section provides product information on the present PXI‑CORE edge controller
software instance:
–
–
–
–
–
5.4.1
Open Source Components
The Open Source Components section provides information on open source components
implemented into the PXI‑CORE software instance.
1.
2.
5.5
Not used functions
The following functions are not used for BT applications:
–
–
Caution!
Data Layer is not used! Do not to use the Data Layer setting or its settings on the PXI-CORE
!
edge controller.
Using the Data Layer results in malfunctioning of the PXI-CORE edge controller and its
installed applications and configurations.
–
Caution!
Scheduler is not used! Do not to use the Scheduler or its settings on the PXI-CORE edge
!
controller.
Using the Scheduler results in malfunctioning of the PXI-CORE edge controller and its
installed applications and configurations.
–
Bosch Security Systems B.V.
Copyright.
Supplier information.
Open source components button:
Refer to Open Source Components, page 19 .
–
EULA (End User License Agreement) button:
–
Click the EULA button to open the file.
Generate system report. Click the Generate report button to produce a .zip file, which
includes:
–
Apps JSON Source File.
–
Logbook.csv files.
–
System information JSON Source File.
Go to/click About.
Below See also, click the Open Source Components button:
–
The Open Source Components overview becomes available.
Automation
Data Layer
Scheduler
Backup and restore
Web-based graphical user interface | en
User manual
19
2023-03 | V01 | F01U395004
Advertisement
Table of Contents
