Explanation Of Signal Words And The Safety Alert Symbol - Bosch Rexroth IndraMotion MTX micro Easy Setup Manual

30/177 Bosch Rexroth AG
Safety instructions for electric drives and controls
4.4

Explanation of signal words and the Safety alert symbol

IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
The Safety Instructions in the available application documentation contain
specific signal words (DANGER, WARNING, CAUTION or NOTICE) and,
where required, a
ANSI Z535.6-2011).
The signal word is meant to draw the reader's attention to the safety instruc‐
tion and identifies the hazard severity.
The safety alert symbol (a triangle with an exclamation point), which pre‐
cedes the signal words DANGER, WARNING and CAUTION, is used to alert
the reader to personal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury
could occur.
CAUTION
In case of non-compliance with this safety instruction, minor or moderate in‐
jury could occur.
NOTICE
In case of non-compliance with this safety instruction, property damage could
occur.
DOK-MTXMIC-EASY*******-CO06-EN-P
safety alert symbol (in accordance with