Bosch Rexroth IndraMotion MTX micro Easy Setup Manual page 94

92/177 Bosch Rexroth AG
NC parameterization
Basic setting
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Fig. 8-7: MAIN
Open all nodes in the first drive DR[1].
Check the assignment of the drive to the machine:
1. Physical axis name SysDrName
2. Linear / rotary axis SysAxType
3. Sercos address ScsAddr
Fig. 8-8: Basic configuration
Check the basic setting of the machine
Name
Number of channels
Number of NC-controlled drives
Number of configurable drives
Physical drive name
DOK-MTXMIC-EASY*******-CO06-EN-P
Path
MAIN/NofCh
MAIN/NofDr
MAIN/NofDrNodes
MAIN/Dr[i]/SysDrName