Nano Settings; Restart The Tx3 Nano; Speaker Volume; Tamper Alarm - Mircom TX3 Series Configuration Manual

3.3

Nano Settings

The Nano Settings section lists the selected TX3 Nano's IP address, MAC
address, model, name, and language. You can change only the name and
language.
Language refers to the language on the TX3 Nano's screen and the language of
the audio notifications. To change the language of the Configurator, see section
2.3.1 on page 16.
Name a TX3 Nano
1.
2.
Change the language on a TX3 Nano
1.
2.
3.4

Restart the TX3 Nano

Restart the TX3 Nano
1.
3.5

Speaker Volume

By default the speaker volume is set to 50.
Change the speaker volume
1.
2.
3.6

Tamper Alarm

By default, the tamper alarm is enabled. Select Disabled to disable it. When
the tamper alarm is disabled, then no alarm will sound when the TX3 Nano is
removed from the mounting plate.
TX3 Nano Configuration Manual
Copyright 2019
Type a name for the TX3 Nano in the Name field.
Click Save Changes at the top of the window.
Select a language in the Language menu.
Click Save Changes at the top of the window.
Click the Restart Nano button.
In the Nano Settings section, provide information for the following:
Speaker Volume. Specify the TX3 Nano speaker volume.
Click Save Changes at the top of the window.
TX3 Nano Settings
23