Figure 24. The List Of Residents; Figure 25. Resident Groups - Mircom TX3 Series Configuration Manual

4.7.1 How Grouping Works on the TX3 Nano Display
If there are no groups, then the TX3 Nano display shows a list of residents by
default. Figure 24 shows a sample list of residents. The number in the brackets is
the total number of residents.
After you create groups, then the TX3 Nano display shows the list of groups by
default. Figure 25 shows a sample list of resident groups. There are 17 groups
(the number in the brackets is the total number of groups). The first 3 groups have
been named A, B, and C after the last names of the residents.
Note:
TX3 Nano Configuration Manual
Copyright 2019

Figure 24. The list of residents

Figure 25. Resident Groups

The list of resident groups is the first thing that visitors see when
they use the TX3 Nano. For this reason, make sure that each
resident is in a group.
Residents
47