Factory Reset - Mircom TX3 Series Configuration Manual

2.4.1 Backup Example
This example describes how the Backup and Restore feature works with 3 TX3
Nanos in the network: A, B and C.
1.
2.
3.
4.
5.
6.
2.5

Factory Reset

Warning: Factory Reset erases all the information on the TX3 Nano,
Perform a factory reset
1.
2.
3.
4.
TX3 Nano Configuration Manual
Copyright 2019
Sign into the Configurator on the master TX3 Nano (A) and perform a
backup.
TX3 Nano B is damaged and removed from the network.
Another TX3 Nano, D, is added to replace the damaged TX3 Nano B.
Sign into the Configurator on the master TX3 Nano and perform a restore.
In the restored network, the damaged panel TX3 Nano B appears
with a broken link.
Manually copy the settings, inputs, outputs, access point, and correlations
from TX3 Nano B to TX3 Nano D.
Remove TX3 Nano B from the network.
including residents and schedules. The default schedules and
holidays are not erased.
After a factory reset, the Configurator password is change d to
admin and the panel password is changed to 111111.
Click the Global Settings button in the upper right corner of the
window.
In the Backup and Restore section, click Factory Reset.
Click OK.
The TX3 Nano restarts and you are signed out of the Configurator.
After the TX3 Nano has restarted, sign into the Configurator as described
in section 2.2 on page 13.
TX3 Nano Configurator
19