Update The Tx3 Nano Software - Mircom TX3 Series Configuration Manual

2.
See section 4.3 on page 42 for information on configuring the residents' SIP
accounts.
3.12

Update the TX3 Nano Software

From time to time Mircom releases new versions of the TX3 Nano software. You
can download new versions of the software from the Mircom website and update
the TX3 Nano by following these instructions.
There are 2 pieces of software that can be updated:
•
•
The first part of the file name indicates whether the file will update the
Configurator (tx3nanoconfig) or the application (tx3nano). The second part of
the file name is the version. For instance, the file that updates the Configurator to
version 1.5.30 is named tx3nanoconfig_1.5-30.deb.
See the current version of the Configurator and application
•
TX3 Nano Configuration Manual
Copyright 2019
Password. The SIP password for the TX3 Nano.
Domain. The IP address or domain name of the SIP server.
Display name. This name appears on the resident's device when the TX3
Nano calls the resident.
Auth username. The authentication username of the TX3 Nano.
Outbound proxy. The SIP server's proxy server, if required.
STUN server. Leave this blank unless your SIP service requires you to
change it.
Compatibility. Leave this as default (None) unless your SIP service
requires to you change it.
Transport. Leave this as default (UDP) unless your SIP service requires
to you change it.
Click Save Changes at the top of the window.
The web-based Configurator. On the Mircom website, the file to update
the Configurator begins with tx3nanoconfig, for example:
tx3nanoconfig_1.5-30.deb
The application that shows the resident list on the TX3 Nano display. On
the Mircom website, the file to update the application begins with
tx3nano, for example: tx3nano_1.1-2.deb
In the Configurator, click the Global Settings button in the upper
right corner of the window.
TX3 Nano Settings
27