Screensaver; Sign Out - Mircom TX3 Series Configuration Manual

2.6

Screensaver

You can upload a maximum of 19 images that the TX3 Nano will display in a
slideshow as a screensaver. The screensaver starts after 5 minutes of inactivity.
Each image file must be less than 5 MB, and must have a minimum resolution of
480x272 pixels. The supported file formats are .jpg, . jpeg, .gif, and .png.
Note:
Upload an image file to the TX3 Nano screensaver
1.
2.
3.
4.
5.
Delete an image file from the TX3 Nano screensaver
1.
2.
2.7

Sign Out

Signing out takes you to the sign in page. If other people are using the computer,
you should sign out when you are finished.
Sign out
•
TX3 Nano Configuration Manual
20
Copyright 2019
The image showing the instructions for using the TX3 Nano
(beginning with Press Up, Down arrow keys to navigate) cannot
be deleted.
In the Screensaver section, click Choose File.
In the window that appears, navigate to the image file and select it.
Click Open.
Click Save Screensaver.
Repeat these steps to upload another image file.
In the Screensaver section, select an image.
Click Delete Screensaver.
To sign out, click the icon in the upper right corner.
TX3 Nano Configurator