Nano Settings; Log Into The Configurator - Mircom TX3 Series Configuration Manual

This chapter describes the basic settings of the TX3 Nano.
This chapter explains
•
•
•
•
•
•
•
•
•
•
2.1

Log into the Configurator

You must configure the TX3 Nano with a Web browser. The TX3 Nano supports
Internet Explorer 11 or higher and Google Chrome.
Get the IP Address of the TX3 Nano
1.
2.
Connect to the TX3 Nano in a Web browser
1.
TX3 Nano Configuration Manual
Copyright 2018
Log into the Configurator
Change the Language of the Configurator
Enter the OnSIP Administrative Account
Configure User Privileges
Log Out
Change the Device Settings
Inputs and Outputs
Access Point
Correlations
Configuring other TX3 Nanos
Connect the TX3 Nano's RJ45 connector to a LAN.
Press and hold the Home button for 10 seconds.
The TX3 Nano's IP address and MAC address appear on the display.
On a computer on the same LAN as the TX3 Nano, open Google Chrome
or Internet Explorer 11 or higher, type the IP address of the TX3 Nano, and
then press enter.
2

Nano Settings

13