Figure 13. Configurator And Application Version - Mircom TX3 Series Configuration Manual

Update the Configurator or application on the TX3 Nano
1.
2.
3.
4.
Note:
5.
6.
7.
8.
TX3 Nano Configuration Manual
28
Copyright 2019
The Configurator version is shown at the bottom of the page, in the
About section.
The TX3 Nano application version is shown under the Configurator
version.
For example,Figure 13 shows Configurator version 1.5.41 and
application version 1.1-5.

Figure 13. Configurator and application version

Download the latest Configurator or application file from
http://www.mircom.com/tx3nano to the same computer that you are
using to access the Configurator.
In the Update TX3 Nano section of the Nano Settings page, click
Choose Files.
In the window that appears, navigate to the software file that you
downloaded, and select it. It has the extension .deb. You can select both
the Configurator and application files at the same time.
Click Open.
You can also drag and drop the software file from Windows
Explorer onto the area that says Drop deb file here.
Click Update.
Click Yes to confirm.
Scroll to the top of the Nano Setting page, then click Restart Nano.
The TX3 Nano restarts and you are signed out of the Configurator.
After the TX3 Nano has restarted, wait 5 minutes for the TX3 Nano to
update its software.
TX3 Nano Settings