Line-Side Connection - Siemens SIMATIC Ident CB Gate Operating Instructions Manual

5.2

Line-side connection

The SITOP PSU6200 power supplies are designed for connection to a 1-phase AC network
(TN, TT or IT network according to IEC 60364-1 with rated voltage 120 - 240 V AC, 50 - 60 Hz)
or to a DC network with 120 - 240 V DC (12 V / 7 A, 24 V / 3.7 A, 24 V / 5 A), or 110 - 240 V
DC (12 V / 12 A, 24 V / 10 A, 48 V / 5 A, 48 V / 10 A).
Figure 5-1
Fusing
Other country-specific regulations must be observed for installation of the device.
NOTICE
Observe the country-specific guidelines
Observe the country-specific guidelines during the installation.
Note
Operation in a DC network
With operation in a DC network, you need to connect the plus pole (+) to L1 and the minus
pole (-) to N.
SIMATIC Ident CB Gate
Operating Instructions, 08/2022, C79000-G8976-C671-01
Line-side connection of the SITOP PSU6200
Connecting
5.2 Line-side connection
27