Appendix
A.3 Ordering data
Editing RDP server group policies
Follow these steps to edit the group policies of the RDP server:
1. Open the Local Group Policy Editor on the RDP server.
To do this, enter "gpedit" in the Windows search field.
2. Navigate to the menu "Computer Configuration > Administrative Templates > Windows
Components > Remote Desktop Services > Remote Desktop Session Host > Device and
Resource Redirection".
3. Double-click the entry "Do not allow supported Plug and Play device redirection" and select
the "Disabled" option box.
4. Close the window.
5. Double-click the entry "Do not allow COM port redirection" and select the "Disabled" option
box.
6. Close the Local Group Policy Editor.
7. Open the command prompt.
To do this, enter "cmd" in the Windows search field.
8. In the command prompt, enter "gpupdate /force" to update the group policies.
9. Restart the host computer for your changes to take effect.
Establishing an RDP connection
To establish an RDP connection, follow these steps:
1. Connect the reader to the RDP client.
2. Open the remote desktop connection and click "Show Options".
3. In the "Local Resources" tab, click on "More..." under "Local Devices and Resources".
4. Select the "Ports" check box.
5. Select the "Other supported RemoteFX USB devices" check box and select the desired reader.
6. Click "OK".
7. Click "Connect".
The reader is now displayed as serial device on the RDP server.
A.3
Ordering data
Table A-2
Product
SIMATIC RF1040R (AS: E)
SIMATIC RF1060R (AS: E)
SIMATIC RF1070R (AS: H)
SIMATIC RF1070R (AS: H)
OEM variant with neutral front foil
90
Ordering data
Article number
6GT2831-6CA50
6GT2831-6AA50
6GT2831-6BA50
6GT2831-6BA50-0AX0
Operating Instructions, 05/2023, C79000-G8976-C432-10
SIMATIC RF1000