Maintenance Schedules; Logging Maintenance Work; Maintenance Tasks After Commissioning; Tab. 83 Maintenance Messages And Measures Connected With Engine Maintenance - KAESER M135 SIGMA CONTROL MOBIL Service Manual

Tab. 83
Tab. 84
10.3
10.3.1
Further information
10.3.2
No.: 9_6975 00 E
10 Maintenance
10.3

Maintenance schedules

Message code range 2100 – 2199 "engine maintenance"
Code Meaning
2100 Change engine oil and filter (500h).
2101 Clean or change the engine air filter (500h).
Maintenance messages and measures connected with engine mainte‐
nance.
Message code range 2200 – 2299 "compressor unit maintenance"
Code Meaning
2200 Change the compressor cooling oil and filter
(1000h).
2201 Clean or change the compressor air filter (250h).
Maintenance messages and measures connected with compressor
maintenance.
Maintenance schedules
The maintenance schedules provide an overview of the maintenance instructions for the machine.
➤ Read the relative section before undertaking maintenance.

Logging maintenance work

The maintenance intervals given are those recommended for average applications and oper‐
ating conditions.
Maintenance schedules may be modified to take into account the application, the environment
and the quality of maintenance.
WARNING
Wear and machine damage through unusual applications or operating conditions.
➤ Maintenance tasks must be carried out more frequently when operating conditions are unfav‐
ourable (e.g. dusty atmosphere) or when the equipment is in constant use.
➤ Adjust the maintenance intervals with regard to local installation and operating conditions.
➤ Keep a log of all properly carried out maintenance and service work.
This enables the frequency of individual maintenance tasks and deviations from our recommen‐
dations to be determined.
A prepared list is provided in chapter 10.10.

Maintenance tasks after commissioning

The table below lists maintenance tasks required after commissioning (initial start-up).
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
Remedy
Change the engine oil.
Change the engine oil filter.
Clean or change air filter.
Remedy
Change the cooling oil.
Change the oil filter.
Clean or change air filter. 10.5.7
See chapter
10.4.6
10.4.7
10.4.2
See chapter
10.5.3
10.5.4
97