Fig. 73 Overrun Braking Mechanism Maintenance - KAESER M135 SIGMA CONTROL MOBIL Service Manual

Option sa
Fig. 73
10.8.2.1
Option sa
Option sa, sd
10.8.2.2
Further information
No.: 9_6975 00 E
10 Maintenance
10.8 Chassis
Overrun braking mechanism maintenance
Handle
1
Transfer cable
2
Check the towbar
1. Check the towbar for correct function and movement.
2. Clean and oil all sliding and rotating bearings.
Check the height setting of the towbar
➤ Check the towbar height setting.
The locking teeth on the towbar height adjustment joint are corroded and jammed and the tow‐
bar height cannot be adjusted.
➤ If necessary, free the teeth by jerking the towbar horizontally and vertically.
➤ Clean the toothed coupling and smear with water-repellent grease.
Maintaining the parking brake
➤ Lightly lubricate the pins and adjustment joints.
Overrun braking mechanism maintenance
Overrun braking mechanism greasing
➤ Pump fresh grease into the nipple until old grease is squeezed out.
For greasing points see figure 73.
Checking the shock absorber
1. Loosen the transfer cable one side.
2. Press in the shock absorber against its damping force.
Have the shock absorber replaced by a specialist workshop if:
■ there is little resistance to pushing in,
■ air has entered the device,
■ there is little resistance to pulling out,
■ oil leaks out.
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
Oil points (option sa)
3
Greasing points
4
137