Setting The Displayed Units; Fig. 30 Temperature Display Setting - KAESER M135 SIGMA CONTROL MOBIL Service Manual

7.4
Precondition
Fig. 30
Result
64
7 Initial Start-up
7.4

Setting the displayed units

Setting the displayed units
The following units can be changed:
■ Unit of temperature
■ Unit of pressure
The unit must only be set once and all displays are adjusted accordingly. The settings remain
when the controller is switched off.
Controller switched on
<Main menu => settings => unit settings> .
Select
Setting the unit of temperature
The temperature unit is selected in the Temperature unit menu option
Temperature display setting
Unit of temperature setting menu
E1
Display unit °C (selected)
T1
Display unit °F
T2
Display unit K
T3
1. Use the «UP»
and/or «DOWN»
2. Press «Enter»
.
The setting is saved.
3. Press «esc»
.
The display changes to show the operating mode.
Setting the unit of pressure
The unit of pressure is selected in the pressure unit menu option
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
Navigation
3
Display field size (white background)
A
Selection choice (grey background)
B
arrow keys to select the required unit.
E2
.
E1
.
No.: 9_6975 00 E