Fig. 43 Select Menu Option "Set Pressure In The Oil Separator Tank; Fig. 44 Setting The Output Pressure - KAESER M135 SIGMA CONTROL MOBIL Service Manual

Precondition
Fig. 43
Fig. 44
78
8 Operation
8.2 Starting and stopping
➤ Press either «LEFT»
This immediately selects the output setting menu.
Entry via menu structure
LOAD
<Main menu => engine operating data – compressor> selected.
Enter the output pressure in the sub-menu "set pressure in oil separator tank"
Select menu option "set pressure in the oil separator tank"
Main menu
1a
Compressor unit data
2b
Navigation (menu)
3
1. Select the compressor data symbol and confirm with «Enter»
2. Select menu option "set pressure in the oil separator tank"
This immediately selects the output setting menu.
Set pressure:
The pressure can only be set at lower than the nominal working pressure of the machine.
A pressure setting 1.5 bar higher than nominal is possible with the appropriate password. This
can only be temporary and falls back to nominal if no key is pressed for 3 minutes or if the
controller is switched off.
Setting the output pressure
Select menu option "set pressure in the oil
4
separator tank"
Minimum working pressure (lower setting
5
limit)
Setting scale with indicator bar
6
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
or «RIGHT» .
7
8
.
Maximum working pressure (upper setting
limit)
Current setting
No.: 9_6975 00 E