Engine Settings; Fig. 33 Password Level 1 Activated - KAESER M135 SIGMA CONTROL MOBIL Service Manual

Fig. 33
7.6
Precondition
66
7 Initial Start-up
7.6

Engine settings

Password is not activated - incorrect password.
➤ Re-enter the password.
The cursor can be moved «LEFT»
Password level 1 activated.
1. Correct the password.
2. Confirm the correct password with «Enter»
The activated password is displayed.
The password level is reset 3 minutes after the last key has been depressed. Temporary settings
are not saved and are lost!
Passwords for other levels are entered in the same way.
Engine settings
This menu option is not available to users. Changes in this menu option can only be made with the
correct password.
The following parameters can be changed:
■ Starter running time (renter, password level 1).
■ Engine cool-down period in unloaded run-on (renter, password level 1).
The following parameters can only be set by Service Technicians.
■ EngineLOAD speed (password level 3).
■ EngineIDLE speed (password level 3).
LOAD and IDLE speeds can be temporarily changed for service purposes or necessary tests.
These changes are not saved and are lost when the controller is switched off.
Controller switched on
<main menu => settings => engine settings> selected.
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
or «RECHTS» to overwrite and incorrect entries.
.
No.: 9_6975 00 E