Displaying Machine Operating Data - KAESER M135 SIGMA CONTROL MOBIL Service Manual

Precondition
Precondition
Precondition
8.5
Precondition
No.: 9_6975 00 E
8 Operation
8.5

Displaying machine operating data

Acknowledging alarm messages
An alarm message is displayed and:
■ the machine is shut down and cannot be restarted,
■
The «Information»
■
The «Acknowledge»
Alarm rectified
➤ Confirm the message with the «Acknowledge»
The «Information»
Acknowledging warning and maintenance messages
A fault warning message or notification of maintenance due is displayed, and:
■
The «Information»
■
The «Acknowledge»
The cause of the warning is rectified
Maintenance is carried out
➤ Confirm the message with the «Acknowledge»
The «Acknowledge»
The «Information» key
fault is rectified or maintenance carried out.
Maintenance acknowledgement is only possible with a password.
Resetting maintenance interval counters
Each maintenance interval counter must be separately reset. Only the counter currently displayed
can be reset.
Maintenance is carried out
1. Enter the password for level 1 (renter level) or higher.
2. Simultaneously press and hold the «Acknowledge»
The displayed maintenance interval counter will be reset.
Displaying machine operating data
Controller switched on
<Main menu => engine operating data – compressor> selected.
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
and «Stop» keys are illuminated.
key flashes.
and «Stop» and «Acknowledge»
key illuminates,
key flashes.
key is extinguished but the «Information»
continues to be illuminated when the machine is restarted until the
key.
keys are illuminated.
key.
key is still illuminated.
and «Enter» keys for 2 seconds.
81