Sigma Control Mobil Settings Menu; Tab. 54 Engine Data Display; Tab. 55 Display Of Compressor Operating Data - KAESER M135 SIGMA CONTROL MOBIL Service Manual

Tab. 54
Tab. 55
4.8.2
42
4 Design and Function
4.8 List of menus
Display page
4. Page
Engine data display
Compressor data
The compressor unit operating data is presented on numerous display pages. With the aid of the
arrow keys, one can page through the menu guide between the display pages.
The following data are shown:
Display page
1. Page
2. Page
Display of compressor operating data

SIGMA CONTROL MOBIL settings menu

Selecting the hand symbol (table 50, item
Password level
Entries and changes in the settings menu are only possible with the correct password.
The password level is reached by means of the "key" symbol in the individual menu views.
The password level is reset 3 minutes after the last key has been depressed. Temporary settings
are not saved and are lost!
There are more than one password levels
Password level Sign Authorization
0 No password
■
1 Renter password
■
■
■
* Maximum machine working pressure
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
Figure
2,2 bar
23 °C
Figure
88 °C
7,5 bar
7,5 bar
5,0 bar 10,0 bar
) in the main menu will open the settings menu.
1b
Only user settings possible
Engine basic settings.
Confirm maintenance carried out.
Temporary pressure increase of 1.5 bar above working pressure.
Engine data
Turbo air pressure
Turbo air temperature
Compressor unit data
Airend discharge temperature
Pressure in the oil separator tank
(OST)
Set pressure in the oil separator
tank (OST)
No.: 9_6975 00 E