Fig. 34 Engine Settings Menu - KAESER M135 SIGMA CONTROL MOBIL Service Manual

Fig. 34
Result
Result
No.: 9_6975 00 E
7 Initial Start-up
7.6 Engine settings
Engine settings menu
Engine settings menu
E4
Starter running time setting
U1
Cool-down period setting
U2
IDLE speed setting
U3
Starter running time setting
The starter running time can be set between 15 and 45 seconds.
1. Use the «UP»
and/or «DOWN»
2. Press «RIGHT»
and/or «LEFT»
3. Press «Enter»
.
The setting is saved.
4. Press «esc»
.
The display changes to show the operating mode.
Cool-down period setting
When the «Stop» key is pressed, the machine switches to unloaded run-on and stops when the
set period has expired.
The COOL-DOWN PERIOD can be set between 30 and 300 seconds.
1. Use the «UP»
and/or «DOWN»
2. Press «RIGHT»
and/or «LEFT»
3. Press «Enter»
.
The setting is saved.
4. Press «esc»
.
The display changes to show the operating mode.
Setting the engine LOAD speed.
1. Use the «UP»
and/or «DOWN»
2. Press «RIGHT»
and/or «LEFT»
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
IDLE speed setting
U4
Navigation (menu)
3
Display field size (white background)
A
Selection choice (grey background)
B
arrow keys to select starter running time setting
keys to select the required time.
arrow keys to select cool-down period setting
keys to select the required time.
keys to select LOAD speed setting
keys to select the required speed.
.
U1
.
U2
.
U3
67