Sigma Control Mobil Event Memory; Fig. 14 Event Memory - KAESER M135 SIGMA CONTROL MOBIL Service Manual

Option ob
Option va
4.8.3
Fig. 14
No.: 9_6975 00 E
4 Design and Function
4.8 List of menus
This menu option is not available to users. Changes in this menu option can only be made with the
correct password.
The following parameters can be set:
■ Starter running time
■ Cool-down run-on time of the engine (machine in IDLE).
■ Engine speed LOAD speed.
■ Engine speed IDLE speed.
"Start/stop/automatic" option
The symbol is stricken through if this option is not available on the machine. The menu option cannot
be entered.
Changes to the parameter are made in the start/stop/automatic menu option
The following parameters can be changed:
■ Run-on period under LOAD.
■ Run-on period in IDLE.
■ Manual or automatic operation (only in Service password level 3).
"External fuel pump" option
The symbol is stricken through if this option is not available on the machine. The menu option cannot
be entered.
By selecting the fuel pump menu option

SIGMA CONTROL MOBIL event memory

Selecting the i symbol (table 50, item
Event memory
Event memory
1d
Faults
R1
Warnings
R2
Maintenance
R3
Machine data information page
R4
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
the fuel tank can be filled with an external pump.
E7
) in the main menu will open the event menu menu option.
1d
Fault memory
R5
Navigation
3
Display field size (white background)
A
Selection choice (grey background)
B
.
E8
45