Transport Options; Chassis - KAESER M135 SIGMA CONTROL MOBIL Service Manual

4.12
4.12.1
4.12.2
4.12.3
No.: 9_6975 00 E
4 Design and Function
4.12

Transport options

To be observed before connecting consumers
DANGER
Devices start automatically without warning.
Serious injury and damage to property is possible.
➤ Make sure that electric consumers are switched off.
Pay particular attention to the following:
■ Read the technical specification for the generator before connecting voltage-sensitive equipment.
■ Check that electric consumers and their connecting cables are in perfect condition.
■ Plug in and switch on consumers one-by-one.
■ Consumers with unfavourable on/off characteristics (e.g. high starting current) should be started
first.
Do not exceed the rated current for each outlet socket so as not to overload the generator.
Take note before switching off the generator
■ Switch off electrical consumers and unplug them one-by-one.
■ Switch off consumers drawing the highest current last.
■ Check that the protective covers on the power sockets are correctly closed.
■ Run the engine for a further 2 minutes after switching off the generator to allow the generator to
cool down.
Option sa, sc, sd, sh, si
Transport options
Option sa

Chassis

The chassis has the following features:
■ Single-axle
■ Rubber-sprung axle
■ Height-adjustable towbar
Option sd
Chassis
The chassis has the following features:
■ Single-axle
■ Rubber-sprung axle
■ Fixed height towbar
Option sh
Chassis
The chassis has the following features:
■ Single-axle
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
53