Menu Structure Of The Sigma Control Mobil; Tab. 47 Sigma Control Mobil Operating Sequence; Tab. 48 Menu Structure Of The Sigma Control Mobil - KAESER M135 SIGMA CONTROL MOBIL Service Manual

Tab. 47
4.7.3
Tab. 48
38
4 Design and Function
4.7 SIGMA CONTROL MOBIL function
Operating Key
sequence
or
Stop
➤ Press the
«Stop» key and
hold for more
than a second.
Failed start,
starting sequence
interrupted
* ADT = airend discharge temperature
** ECT = engine coolant temperature
*** OST = oil separator tank
SIGMA CONTROL MOBIL operating sequence

Menu structure of the SIGMA CONTROL MOBIL

Menu structure
Main menu
Display of operating modes
Menu structure of the SIGMA CONTROL MOBIL
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
Indication
60 s
7 bar
20 s
20 s
Menu level 1 Menu level 2
Main menu Operating data
Compressor engine
Settings menu
Password input
Engine test mode (ECU)
Generator operating data
Event memory Alarm messages
Warning messages
Maintenance messages
Explanation
The machine switches
over to unloaded run-on.
The cool-down period is
displayed
The engine runs at IDLE
speed.
The machine is vented.
The «Load» key flashes.
Pressure in the OST** > 1
bar: back-pressure dis‐
played.
Pressure in the OST** ≤ 1
bar: display indicates
"ready to start".
The start inhibit function is
activated if the machine
fails to start or if the start‐
ing sequence is interrup‐
ted.
The display shows the
time remaining until the
next starting sequence is
allowed.
No.: 9_6975 00 E