High Capacity Stacker (Hcs) Tray; Standard Finisher - Xerox Versant 2100 Press Customer Expectation & Installation Manual

Detailed Specifications

High Capacity Stacker (HCS) Tray

The HCS is designed for long production runs.
 Up to 5,000 sheets offsetting output stack tray with movable cart to move to off line finishing.
 500 sheet top tray
 Sample Prints are additional prints directed to the top tray for inspection. Samples are not produced by redirecting sheets from the Stack to the Top Tray;
therefore the contents in the Stack Tray are complete.
HCS Feature
Specifications
Stacker Tray Capacity
Top Tray Capacity
Maximum Stack Weight
Maximum Paper Size
Power requirement
HCS
 The HCS is subject to stack weight limitations, and settings have been implemented to prevent damage to the unit caused by an
Limitations
excessively heavy stack. Please refer to this chart for approximate stack sizes for sheets larger than 8.5 x 11 in./A4.
 Stack quality may degrade and jams may increase with 64-106gsm coated paper stocks
 Mixed stock sizes can be sent to the HCS. However, the HCS generally should be unloaded between jobs that utilize different stock sizes to
prevent stack quality problems such as paper misalignment or stack integrity.
 Two or more stackers may be chained together.
Stacker Tray Specifications
Stacker Tray Capacity by weight and paper finish
Paper type and weight
Uncoated Sheets
52-350 gsm
Stack Height
Coated Sheets
64-350 gsm
Stack Height

Standard Finisher

The Standard Finisher is an output device that can perform up to 100-sheets stapling, up to 3,000 sheets stacking, punch, saddle stapling/center-fold, optional
C/Z-fold/three-fold, and cover paper insertion.
The Standard Finisher has a built-in interposer (Tray T1 or 8 depending on your product) that feeds cover paper to the finisher for stapled sets. Other than the
Top Tray, the Standard Finisher does not support the full paper weight range that can be printed on the press. Refer to Standard Finisher Specifications for
details on the media that is supported.
Standard Finisher Specifications
Top Tray
Standard Finisher Top Tray Capacity by weight and paper finish
Paper type and weight
Uncoated 52-80 gsm
80-350 gsm
Coated 106-350 gsm
*Cannot be offset
Stacker Tray
Standard Finisher Stacker Tray Capacity by weight and paper finish
Paper type and weight
Uncoated 52-80 gsm
80-300 gsm
Coated 106-300 gsm
*Cannot be offset, 301-350 gsm media cannot be sent to the Stacker Tray (accepted in Top Tray only)
Customer Expectation and Installation Guide
Specification (with centerline paper)
5,000 sheets
500 sheets
70KG (154 lbs.)
330mm x 488mm (13 x 19.2)
Refer to Electrical Requirements for Optional Devices for information.
Smallest size A4 /
203 x 182 Min 8.5 x 11 in.
< 5,000 < 5,000
H < 570mm H < 570mm
(22.44 in) (22.44 in)
< 5,000 < 5,000
H < 570mm H < 570mm
(22.44 in) (22.44 in)
Post Card A4 /
182x257 mm 8.5 x 11 in.
H=67mm 500
(2.64 in.)
H=67mm H=67mm
(2.64 in.) (2.64in.)
H=67mm H=67mm
(2.64 in.) (2.64 in.)
Paper Size
B5 / A4 /
182 x 257 mm 8.5 x 11 in.
1,500 3,000
H=180 mm H=378 mm
(7.09 in.) (14.88 in.)
H=180 mm H=378 mm
(7.09 in.) (14.88 in.)
Paper Size
B4 / A3 /
8.5 x 14 in. 11 x 17 in.
< 2,300 < 2,300
H < 460mm H < 460mm
(<18.11 in) (<18.11 in)
< 3,400 < 3,400
H < 412mm H < 412mm
(<16.22 in) (<16.22 in)
Paper Size
B4 / A3 /
8.5 x 14 in. 11 x 17 in.
500 500
H=67mm H=67mm
(2.64 in.) (2.64 in.)
H=67mm H=67 mm
(2.64 in.) (2.64 in.)
B4 / A3 /
8.5 x 14 in. 11 x 17 in.
1,500 1,500
H=180 H=180
mm (7.09 in.) mm (7.09 in.)
H=180 mm H=180 mm
(7.09 in.) (7.09 in.)
Xerox Confidential
Xerox Versant™ 2100 Press
®
12 x 18 in. SRA3
< 2,300 < 2,300
H < 460mm H < 460mm
(<18.11 in) (<18.11 in)
< 3,400 < 3,400
H < 412mm H < 412mm
(<16.22 in) (<16.22 in)
12 x 18 in.* SRA3*
500 500
H=67mm H=67mm
(2.64 in.) (2.64 in.)
H=67mm H=67 mm
(2.64 in.) (2.64 in.)
12 x 18 in.* SRA3*
1,500 1,500
H=180 H=180 mm
mm (7.09 in.) (7.09 in.)
H=180 mm H=180 mm
(7.09 in.) (7.09 in.)
16
13 x 19.2 in.
< 2,300
H < 460mm
(<18.11 in)
< 3,400
H < 412mm
(<16.22 in)
13 x 19.2 in.*
500
H=67mm
(2.64 in.)
H=67mm
(2.64 in.)
13 x 19.2 in.*
1,500
H=180 mm
(7.09 in.)
H=180 mm
(7.09 in.)