Tray 1 Mode And Tray 2-N Mode - Xerox Phaser 4510 User Manual

Tray 1 Mode and Tray 2-N Mode

The Tray 1 and Tray 2-N modes define the printer's media handling behavior to better fit the
kind of printing you want to do. Two modes determine how paper size and type are set for
Tray 1 and for Trays 2-N, and which tray is used if you do not select a specific tray:
■
■
See also:
Downloaded From ManualsPrinter.com Manuals
Dynamic (Factory default for Tray 1 Mode): The dynamic setting prompts the printer to
search the trays to find the paper size and type to match your print job. If no size and type
matches are found and the media size and type have not been configured at the printer's
control panel, the printer will print from the highest priority unconfigured tray and set the
paper type and size from the print job. The default tray priority is Tray 2, 3, 4, and then 1.
Static (Factory default for Tray 2-N Mode): The static setting enables the user to select the
paper size and type settings for the trays using the Paper Tray Setup menu option on the
printer's control panel. To print from a tray, the paper size and type of your print job must
match the tray's paper size and type settings on the control panel.
Advanced Features Guide at
information on Tray 1 Mode and Tray 2-N Mode
www.xerox.com/office/4510support
Phaser® 4510 Laser Printer
3-17
Loading Paper
for additional