9. Disconnect the car plug (12) from
the 12 V car socket and neatly wind
up the cable.
10. Clean and dry the inside of the
board bar after use. This will pre-
vent mould from forming.
Tips for achieving the best cooling
Select a well ventilated location for
use, away from sunlight.
Allow warm dishes to first cool down
before keeping them cool in the
Do not open the board bar more than
Do not leave the board bar open
longer than necessary.
Minimal care will ensure your device
remains functional for years.
Carefully wind the cable when storing
the device. This will help prevent
accidental damage to the cable and
Clean the product with a soft, dry
Store the machine in a clean, dry
Changing the fuses
a fuse inside the car plug safeguards
the device. This will respond in the
event of a short circuit or voltage peaks
and must then be replaced.
Do not use higher rated fuses. The elec-
tronics may otherwise be damaged.
1. Unscrew the retaining pin (1) with
the fuse cover (2) from the car plug
2. Insert a new micro-fuse (3) of the
same rating (see Technical Data).
3. Replace the retaining pin (1) with
the fuse cover (2) in the car plug (4).