Table of Contents
Advertisement
1.
Outline and Features
TMP91C824 is a high-speed 16-bit microcontroller designed for the control of various mid- to
large-scale equipment.
TMP91C824FG comes in a 100-pin flat package. JTMP91C824-S is a chip form product.
Listed below are the features.
(1) High-speed 16-bit CPU (900/L1 CPU)
•
Instruction mnemonics are upward-compatible with TLCS-90
•
16 Mbytes of linear address space
•
General-purpose registers and register banks
•
16-bit multiplication and division instructions; bit transfer and arithmetic instructions
•
Micro DMA: 4 channels (485 ns/2 bytes at 33 MHz)
(2) Minimum instruction execution time: 121 ns (at 33 MHz)
(3) Built-in RAM: 8 Kbytes
Built-in ROM: None
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability
Handbook" etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer's own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the
chapter entitled Quality and Reliability Assurance/Handling Precautions.
CMOS 16-Bit Microcontrollers
TMP91C824FG/JTMP91C824-S
91C824-1
TMP91C824
20070701-EN
2008-02-20
Advertisement
Table of Contents
