Xantrex XPR 10-600 Operating Manual page 25

Table 1.2 Rear Panel J1 Connector Terminals and Functions
Pin Reference Name
J1-1 VPGM
J1-2 IPGM
1
J1-3 RTN-P
J1-4 VMON
J1-5 IMON
1
J1-6 RTN-M
J1-7 N/C
2
J1-8 GND-U
J1-9 +15V-U
J1-10 N/C
4
J1-11 RTN-I
J1-12 INT
J1-13 N/C
J1-14 RTN
J1-15 S/D
1. Both RTN-PGM and RTN-MON are connected at the same potential.
2. An isolated (see footnote below) supply voltage is available for external usage (e.g. remote on/off line). Its internal
impedance is approximately 100 Ω.
3. User supply is isolated to 600 V from the power supply output and chassis.
4. Safety Interlock circuit is isolated to 600 V from the power supply output and chassis.
Release 1.1
Output Voltage
Programming Input
Output Current Limit
Programming Input
Program Return
Output Voltage Monitor
Output Current Monitor
Monitor Return
No connection
Return of 15 V User Signal
+ 15 V User Signal
No connection
Return Interlock
Interlock Signal (4-15 V)
No connection
Return Shutdown
Shutdown
Function
Input for voltage programming signals
from a voltage source (select S1-5 = ON
and:
S1-3 = OFF for 0-5 V range
S1-3 = ON for 0-10 V range
(see Table 4.3, on page 63
Input for current limit programming
signals from a voltage source (select
S1-6 = ON and:
S1-4 = OFF for 0-5 V range
S1-4 = ON for 0-10 V range
(see Table 4.3, on page 63
Return for voltage and current
programming signals
Output for output voltage monitor signal
Output for output current monitor signal
Return for voltage and current monitoring
signals
None.
Return for 15 V isolated
+ 15 V isolated voltage supply
None.
Return safety interlock (shutdown)
Safety interlock (shutdown) 4-15 V
None.
Return master/slave S/D signal
Shutdown master/slave signal (5-15 V)
About The XPR Power Supply
Rear Panel Connectors and Switch
In/Output
Input
for details)
Input
for details)
Input
Output
Output
Output
N/C
3
supply voltage. Output
Output
N/C
Input
Input
N/C
Input
Input
23