Multiple Loads - Xantrex XPR 10-600 Operating Manual

Multiple To connect multiple loads in parallel:
Loads
•
•
Figure 2.6 Fastening the Output Wires
Release 1.1
Follow the "Single Load"
To minimize interaction between loads, bring the wiring for each load directly
back to the supply output. When each load to the power supply is wired
separately, the loads will see only the precisely regulated output from the supply.
If 2 loads share a single cable, the fluctuation in current to one load will cause
the voltage to vary on the others. This is due to wire impedance drops.
(Low and Medium Voltage)
procedure with the following exception:
Installation
Load Connections
43