Status Annunciators - Xantrex XPR 10-600 Operating Manual

Status Annunciators

2
1
Figure 1.2 Front Panel Display, Status Annunciators
1. AC: The AC input is out of range and has caused the output of the supply to be
2. OTP: The internal Over Temperature Protection threshold has been exceeded,
3. INT: The external shutdown line has been asserted, disabling the output of the
4. OVP: The output Over Voltage Protection threshold have been exceeded,
5. SNS: The remote sense line protection circuit has been activated, latching the
6. ON: The supply output is enabled (green)
7. OFF: The supply output has been disabled (green)
8. LCL: The supply is in Local control mode (green)
9. RMT: The supply is in Remote program mode (green)
10. CV: The supply is operating in Constant Voltage mode (green)
11. CC: The supply is operating in Constant Current mode (green)
Release 1.1
4
3
shut down (red)
disabling the supply output until the sensors cool to within the normal operating
temperature range (red)
supply (green)
latching the supply output off (red)
supply output off (red)
6
5 7
About The XPR Power Supply
Status Annunciators
8
9
11
10
19