Xantrex XPR 10-600 Operating Manual page 75

Analog Programming Interface
Programming Lines, Impedance
0-5 V
0-10 V
Readback Lines, Impedance
0-5 V
0-10 V
Isolation, all program and readback lines
Interlock - Remote Shutdown
4-15 V signal or TTL-compatible output, selectable logic
TTL input impedance
Maximum Supply Voltage
Minimum Supply Voltage
User Supply Voltage
+ 15 V supply voltage source with approximately 100Ω impedance
Maximum Supply Voltage
Minimum Supply Voltage
Switching Frequency
Typical 31 kHz; 62 kHz output ripple
Rise Time
5 to 95% step in output voltage.
Load Condition
No Load
Full Load
1.
Release 1.1
range Approximately 3 MOhm
dc
range Approximately 3 MOhm
dc
range Approximately 400 Ohm
dc
range Approximately 400 Ohm
dc
•
non-isolated for standard configuration, referenced to
supply "negative" output.
• 600 Vdc with respect to chassis potential or negative
output with Isolated Programming (ISOL) Internal Interface
card (available as an optional configuration)
Time (Max)
100 ms
100 ms
Isolated from power supply output and chassis to 600 V.
Specifications and Characteristics
2kOhm (in series with one diode drop)
15 V
dc
4 V
dc
17.5 V
14 V
Output Performance Specifications
.
1
.
73