Canbus Error Codes; Multichannel Error Codes; Table C.11Canbus Error Codes; Table C.12Multichannel Error Codes - Xantrex GPIB-M-HPD Operating Manual

CANbus Error Codes

Table C.11CANbus Error Codes

Error
code
+1701
+1702
+1703
+1704
+1705
+1706

Multichannel Error Codes

Table C.12Multichannel Error Codes

Error
code
+1800
+1802
+1803
+1804
+1805
Release 2.1
Error Message Description
CANbus hardware missing
The CANbus option is not installed on the controller card, or controller card is
not present.
CANbus device specific error
An error has occurred on the CANbus circuit. Probable causes are AC input
too low, AC input not secure, controller card not securely fastened or other
noise sources.
CANbus input buffer corrupted.
CANbus input buffer corrupted.
CANbus input buffer overrun.
Data is sent on the CANbus faster than the CPU can process.
CANbus output buffer overrun.
Data cannot be transmitted fast enough.
Error Message Description
Multichannel general error
An error has occurred while sending multichannel commands. One such
cause is sending a command that is too long.
Multichannel address taken
The multichannel address configured for this unit has already been assigned
to another unit on the CANbus network.
Multichannel originator not responding
The originator of the message is not responding to the handshaking.
Multichannel recipient not responding
The recipient of the message is not acknowledging the reception of the
command.
Multichannel command overwritten
A received command through the CANbus has been overwritten.
Error Messages
CANbus Error Codes
123