Command Error List; Execution Error List; Table C.1Command Error List; Table C.2 Execution Error List - Xantrex GPIB-M-HPD Operating Manual

Error Messages

Command Error List

Command Error List
An error in the range [-199, -100] indicates that an IEEE 488.2 syntax error has been
detected by the instrument's parser. The occurrence of any error in this class causes
the command error bit (bit 5) in the Event Status Register to be set.

Table C.1Command Error List

Error
code
-100
-105
-114
-120
-123
-151

Execution Error List

An error in the range [-299, -200] indicates that an error has been detected by the
instrument's execution control block. The occurrence of any error in the class causes
the execution error bit (bit 4) in the Event Status Register to be set.
Execution errors are reported by the device after rounding and expression evaluation
operations have taken place.

Table C.2 Execution Error List

Error
code
-200
-203
118
Error Message Description
Command error
This is the generic syntax error.
GET not allowed
A Group Execute Trigger was received within a program message.
Header suffix out of range
The value of a numeric suffix attached to a program mnemonic is out of range.
May refer to multichannel addressing, auto sequence number or auto
sequence step number.
Numeric data error
This error is generated when parsing a data element which appears to be
numeric, including the non-decimal numeric types.
Exponent too large
The magnitude of the exponent was larger than 32000.
Invalid string data
The data with the enclosed (") double apostrophes (string) is invalid.
Possibility of wrong length or character.
Error Message Description
Execution error
This is the generic error for the power supply.
Command protected
Indicates that a legal password-protected program command or query could not
be executed because the command was disabled. Check calibration state.
Operating Manual for Multichannel Functionality (GPIB-M)